WS5 Scan Tool Diagnostics

Scan Tool readings.

Engine Load MAP 0.9 V
Engine RPM RPM 750 RPM
Throttle angle TPS 9 percent
Engine coolant ECT 85 Degrees celcious
Intake air temperature IAT 56 Degrees celcious
Fuel Injection opening pulse PWM 1.5 MS
Vehicle Speed VSS 0 KM/H
Oxygen sensor(s) 02 0.8V
Idle control IACV 265 mA

There were no faults as the car has no problems.

Create Faults

3 MAP Voltage to high

6 ECT Voltage to high

7 TPS Voltage to low.

The problem was the MAP,ECT and TPS were all unplugged.

To repair I plugged the connectors back in.

Recheck

ECT 85 Degrees

MAP 0.9V

TPS 9 %

To clear the codes i disconnected the battery.

There where no error codes after disconnecting the battery.

Live data is usefull for finding intermitant faults.

Scan tool aids fault finding because it will tell you which sensor / circuit has a problem then you can diagnose it yourself. It saves checking multiple things just have to check the one with a problem.